Its 100% taped seams!
---specs---
WATERPROOFING
- The rain simulator reproduces these conditions for 2 hours. - Component resistant to water pressure of 2000mm after ageing (= 2000 Schmerber - average pressure of water during a downpour) - Water repellent components (water runs off the fabric). - Fully taped seams. - Adjustable straps. - Bottom of the legs adjustable by rip-tab strips.
BREATHABILITY
RET <12: very breathable. To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapour produced by the body during exercise to escape.
FEATURES
- Injected plastic central zip - Elasticated, adjustable straps and elasticated waistband.
HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY step 1: before washing
Close all zips and flaps and remove any parts of the garment that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets. Then turn the garment inside out to wash it.
HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY step 2: washing
You can wash your jacket on a synthetic cycle at 30 or 40C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach. Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine. Very important: select a thorough rinse or double rinse to completely remove all detergent residue.
HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY step 3: drying
Drying is a crucial phase in reactivating the water repellent treatment. We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator. Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.
HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY
If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you "re-waterproof" it using a waterproofing spray sold in our stores.
---/specs---
---features---
Waterproof
Tested under a simulated moderate rain shower (60 L/hr/sqm) for 2 hours
Breathability
Very breathable coating (RET<12)
---/features---
---videos---
1519483
---/videos---
---catchline---
These waterproof and breathable salopettes with fully taped seams provide excellent waterproofing against downpours and waves that come over boat decks.
---/catchline---